Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from MGE UPS SYSTEMS.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.0.3

Report #1 with driver mge-shut (detailed comments available)

This device is known to work with driver mge-shut.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100

battery.charge.low

25

battery.runtime

02025

driver.name

mge-shut

driver.parameter.port

/dev/ttyS0

driver.version

2.0.3

driver.version.internal

0.65

input.frequency

50

input.voltage

221

outlet.0.desc

Main Outlet

outlet.0.id

0

outlet.0.switchable

0

outlet.1.autoswitch.charge.low

20

outlet.1.delay.shutdown

-1

outlet.1.delay.start

-1

outlet.1.desc

PowerShare Outlet 1

outlet.1.id

1

outlet.1.switch

1

outlet.1.switchable

1

outlet.2.autoswitch.charge.low

20

outlet.2.delay.shutdown

-1

outlet.2.delay.start

-1

outlet.2.desc

PowerShare Outlet 2

outlet.2.id

2

outlet.2.switch

1

outlet.2.switchable

1

output.frequency

49

output.voltage

222

output.voltage.target.battery

230

output.voltage.target.line

230

ups.delay.shutdown

-1

ups.delay.start

-1

ups.load

21

ups.mfr

MGE UPS SYSTEMS

ups.power.nominal

800

ups.serial

unknown

ups.status

OL CHRG

ups.test.result

Done and passed