Network UPS Tools

Click here to see reports of other supported models from Riello.

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.7.4

This device is known to work with driver riello_usb.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

This device is known to support the following variables (values are just examples):

battery.capacity	`5`
battery.charge	`255` constant; does not update (see also iDialog 800 entry)
battery.runtime	`3932100 # BAD: constant; equals 0xFFFF * 60`
battery.voltage	`13.5`
battery.voltage.nominal	`12`
device.mfr	`RPS S.p.a.`
device.model	`USV5`
device.serial
device.type	`ups`
driver.name	`riello_usb`
driver.parameter.pollinterval	`2`
driver.parameter.port	`auto`
driver.parameter.synchronous	`no`
driver.version	`2.7.4`
driver.version.internal	`0.03`
input.bypass.frequency	`409.50` constant/out-of-range
input.bypass.voltage	`4095` constant/out-of-range
input.frequency	`50.10`
input.voltage	`235`
output.L1.current	`0` vendor web page indicates that this is a single-phase unit.
output.L1.power	`0`
output.L1.realpower	`0`
output.L2.current	`0`
output.L2.power	`0`
output.L2.realpower	`0`
output.L3.current	`0`
output.L3.power	`0`
output.L3.realpower	`0`
output.frequency	`50.10`
output.frequency.nominal	`50.0`
output.power.percent	`0` unimplemented?
output.voltage	`233`
output.voltage.nominal	`230`
ups.firmware	`SWM036-01-02`
ups.load	`0` unimplemented?
ups.mfr	`RPS S.p.a.`
ups.model	`USV5`
ups.power.nominal	`600`
ups.productid	`5500`
ups.realpower.nominal	`360`
ups.serial
ups.status	`OL`
ups.temperature	`255` constant/out-of-range
ups.vendorid	`04b4`

Reported at: