Network UPS Tools - SPS 850 ADV T

Click here to see reports of other supported models from Salicru.

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.8.0

Report #1 with driver usbhid_ups (detailed comments available)

This device is known to work with driver usbhid_ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge	`100`
battery.charge.low	`10`
battery.charge.warning	`20`
battery.runtime	`4500`
battery.runtime.low	`300`
battery.type	`PbAcid`
battery.voltage	`26.00`
battery.voltage.nominal	`24`
device.mfr	`1`
device.model	`850`
device.serial	`000000000000`
device.type	`ups`
driver.name	`usbhid-ups`
driver.parameter.pollfreq	`30`
driver.parameter.pollinterval	`2`
driver.parameter.port	`auto`
driver.parameter.productid	`0302`
driver.parameter.synchronous	`auto`
driver.parameter.vendorid	`2e66`
driver.version	`2.8.0-21-gf8462e88a`
driver.version.data	`Salicru HID 0.3`
driver.version.internal	`0.47`
driver.version.usb	`libusb-0.1 (or compat)`
input.frequency	`50.2`
input.voltage	`228.0`
input.voltage.nominal	`230`
output.frequency	`50.2`
output.voltage	`22.8`
output.voltage.nominal	`24`
ups.beeper.status	`enabled`
ups.load	`11`
ups.mfr	`1`
ups.model	`850`
ups.productid	`0302`
ups.realpower.nominal	`595`
ups.serial	`000000000000`
ups.status	`OL`
ups.vendorid	`2e66`

About this device

First report for new salicru HID subdriver from PR referenced above for Salicru SPS 850 ADV T.

I tried to set the value of battery.runtime.low and battery.charge.low using upsrw, but although the command returns OK, no values seem to be modified.

Reported at:

https://github.com/networkupstools/nut/issues/1416

Vendor/Manufacturer information:

https://www.salicru.com/sps-850-adv-t.html

Further system data or configuration examples:

Variables per upsrw ups@localhost listing

# TODO: Convert to RW:... and RO:... markup
:; upsrw ups@localhost
[battery.charge.low]
Remaining battery level when UPS switches to LB (percent)
Type: STRING
Maximum length: 10
Value: 10

[battery.runtime.low]
Remaining battery runtime when UPS switches to LB (seconds)
Type: STRING
Maximum length: 10
Value: 300

Commands per upscmd -l ups@localhost listing

# Commands (none reported)
# TODO: Convert to CMD:... markup
:; upscmd -l ups@localhost
Instant commands supported on UPS [salicru]: