NUTSCAN_SCAN_EATON_SERIAL(3)

nutscan_scan_eaton_serial - Scan serial ports for Eaton devices (XCP, SHUT and Q1).

The nutscan_scan_eaton_serial() function tries to detect NUT devices which are compatible with Eaton’s serial device protocols (SHUT, XCP and Q1 (aka blazer or megatec)).

ports_list is a string specifying a serial port, a range such as 0-1, or a comma-separated list such as /dev/ttyS0,/dev/ttyS1. The function expands this string internally using nutscan_get_serial_ports_list(3), which describes the supported syntax and platform-specific port names.

You MUST call nutscan_init(3) before using this function.

The nutscan_scan_eaton_serial() function returns a pointer to a nutscan_device_t structure containing all found devices or NULL if an error occurs or no device is found.

nutscan_init(3), nutscan_scan_usb(3), nutscan_scan_xml_http_range(3), nutscan_scan_snmp(3), nutscan_scan_avahi(3), nutscan_scan_ipmi(3), nutscan_display_ups_conf(3), nutscan_display_sanity_check(3), nutscan_display_sanity_check_serial(3), nutscan_display_ups_conf_with_sanity_check(3), nutscan_display_parsable(3), nutscan_new_device(3), nutscan_free_device(3), nutscan_add_option_to_device(3), nutscan_add_device_to_device(3), nutscan_get_serial_ports_list(3)