Network UPS Tools - Smart-UPS 1500

Click here to see reports of other supported models from APC.

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.7.2

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

This device is known to support the following variables (values are just examples):

battery.charge	`93`
battery.charge.low	`10`
battery.charge.warning	`50`
battery.mfr.date	`2006/04/01`
battery.runtime	`2220`
battery.runtime.low	`120`
battery.temperature	`30.6`
battery.type	`PbAc`
battery.voltage	`27.4`
battery.voltage.nominal	`24.0`
device.mfr	`American Power Conversion`
device.model	`Smart-UPS 1500`
device.serial	`AS0614322014`
device.type	`ups`
driver.name	`usbhid-ups`
driver.parameter.pollfreq	`30`
driver.parameter.pollinterval	`2`
driver.parameter.port	`auto`
driver.version	`2.7.2`
driver.version.data	`APC HID 0.95`
driver.version.internal	`0.38`
input.sensitivity	`high`
input.transfer.high	`127`
input.transfer.low	`106`
input.transfer.reason	`input voltage out of range`
input.voltage	`121.6`
output.frequency	`60.0`
output.voltage	`121.6`
output.voltage.nominal	`120.0`
ups.beeper.status	`enabled`
ups.delay.shutdown	`20`
ups.delay.start	`30`
ups.firmware	`601.3.D`
ups.firmware.aux	`1.5`
ups.load	`32.5`
ups.mfr	`American Power Conversion`
ups.mfr.date	`2006/04/01`
ups.model	`Smart-UPS 1500`
ups.productid	`0002`
ups.serial	`AS0614322014`
ups.status	`OL`
ups.test.result	`No test initiated`
ups.timer.reboot	`-1`
ups.timer.shutdown	`-1`
ups.timer.start	`-1`
ups.vendorid	`051d`

Reported at:

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

This device is known to support the following variables (values are just examples):

battery.charge	`100`
battery.charge.low	`10`
battery.charge.warning	`50`
battery.mfr.date	`2008/05/22`
battery.runtime	`3420`
battery.runtime.low	`120`
battery.temperature	`24.7`
battery.type	`PbAc`
battery.voltage	`27.7`
battery.voltage.nominal	`24.0`
device.mfr	`American Power Conversion`
device.model	`Smart-UPS 1500`
device.serial	`AS0821131402`
device.type	`ups`
driver.name	`usbhid-ups`
driver.parameter.pollfreq	`30`
driver.parameter.pollinterval	`2`
driver.parameter.port	`auto`
driver.version	`2.6.4`
driver.version.data	`APC HID 0.95`
driver.version.internal	`0.37`
input.sensitivity	`high`
input.transfer.high	`253`
input.transfer.low	`208`
input.voltage	`231.8`
output.current	`1.05`
output.frequency	`50.0`
output.voltage	`231.8`
output.voltage.nominal	`230.0`
ups.beeper.status	`enabled`
ups.delay.shutdown	`20`
ups.delay.start	`30`
ups.firmware	`653.18.I`
ups.firmware.aux	`7.3`
ups.load	`22.7`
ups.mfr	`American Power Conversion`
ups.mfr.date	`2008/05/22`
ups.model	`Smart-UPS 1500`
ups.productid	`0002`
ups.serial	`AS0821131402`
ups.status	`OL`
ups.test.result	`No test initiated`
ups.timer.reboot	`-1`
ups.timer.shutdown	`-1`
ups.timer.start	`-1`
ups.vendorid	`051d`

This device is known to support the following NUT’s instant commands:

Reported at:

This device is known to work with driver apcsmart.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

This device is known to support the following variables (values are just examples):

battery.alarm.threshold	`0`
battery.charge	`100.0`
battery.charge.restart	`00`
battery.date	`09/06/05`
battery.packs	`000`
battery.runtime	`3720`
battery.runtime.low	`120`
battery.voltage	`27.40`
battery.voltage.nominal	`024`
driver.name	`apcsmart`
driver.parameter.pollinterval	`2`
driver.parameter.port	`/dev/ttyS0`
driver.parameter.sdtype	`0`
driver.version	`2.2.1-`
driver.version.internal	`1.99.8`
input.frequency	`50.00`
input.quality	`FF`
input.sensitivity	`H`
input.transfer.high	`253`
input.transfer.low	`208`
input.transfer.reason	`S`
input.voltage	`236.1`
input.voltage.maximum	`236.1`
input.voltage.minimum	`233.2`
output.voltage	`236.1`
output.voltage.nominal	`230`
ups.delay.shutdown	`090`
ups.delay.start	`000`
ups.firmware	`601.3.I`
ups.id	`UPS_IDEN`
ups.load	`004.5`
ups.mfr	`APC`
ups.mfr.date	`09/06/05`
ups.model	`Smart-UPS 1500`
ups.serial	`AS0537230534(`
ups.status	`OL`
ups.temperature	`031.0`
ups.test.interval	`1209600`
ups.test.result	`NO`

The commands to shutdown the UPS don’t seem to work: shutdown.stayoff, shutdown.return and load.off all seem to silently do nothing.

Reported at: