Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from APC.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.0.4

Report #1

This device is known to work with driver newhidups, now replaced by the usbhid-ups one.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100

battery.charge.low

10

battery.charge.warning

50

battery.mfr.date

2005/11/25

battery.runtime

900

battery.runtime.low

120

battery.temperature

33

battery.type

PbAc

battery.voltage

27.3

battery.voltage.nominal

24.0

driver.name

newhidups

driver.parameter.port

/dev/usb/hiddev0

driver.version

2.0.4

driver.version.data

APC/CyberPower HID 0.9

driver.version.internal

0.28

input.voltage

228.9

output.voltage

227.5

output.voltage.target.line

230.0

ups.beeper.status

enabled

ups.delay.shutdown

-1

ups.firmware

651.12.I

ups.firmware.aux

4.2

ups.load

53.3

ups.mfr

American Power Conversion

ups.mfr.date

2005/11/25

ups.model

Smart-UPS 750

ups.serial

QS0548341065

ups.status

OL

ups.test.result

No test initiated