Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from APC.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.6.4

Report #1

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100

battery.charge.low

10

This variable can be set through upsrw to a string value upto the length of 10 characters.

battery.charge.warning

50

battery.runtime

3780

battery.runtime.low

120

This variable can be set through upsrw to a string value upto the length of 120 characters.

battery.type

PbAc

battery.voltage

27.0

battery.voltage.nominal

24.0

device.mfr

American Power Conversion

device.model

Smart-UPS C 1500

device.serial

3S1437X00405

device.type

ups

driver.name

usbhid-ups

driver.parameter.pollfreq

30

driver.parameter.pollinterval

2

driver.parameter.port

auto

driver.parameter.productid

0003

driver.parameter.vendorid

051d

driver.version

2.6.4

driver.version.data

APC HID 0.95

driver.version.internal

0.37

ups.beeper.status

disabled

ups.delay.shutdown

20

This variable can be set through upsrw to a string value upto the length of 20 characters.

ups.firmware

UPS 09.6 / ID=1005

ups.mfr

American Power Conversion

ups.mfr.date

2014/09/09

ups.model

Smart-UPS C 1500

ups.productid

0003

ups.serial

3S1437X00405

ups.status

OL

ups.timer.reboot

-1

ups.timer.shutdown

-1

ups.vendorid

051d

Known supported commands

This device is known to support the following NUT’s instant commands:

  • beeper.disable

  • beeper.enable

  • beeper.mute

  • beeper.off

  • beeper.on

  • load.off

  • load.off.delay

  • shutdown.reboot

  • shutdown.stop