Click here to see reports of other supported models from APC.
|
When a user reports that a variable/command is not right then it will be highlighted by a red underline. Bad values/ranges/etc… will get a red dashed outline or red solid left border. The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left. |
2.7.4
Report #1 with driver usbhid-ups (detailed comments available)
This device is known to work with driver usbhid-ups.
You can grab a dummy-ups compliant .dev file to simulate this device clicking here.
Some more detailed comments are available after the "Known supported…" sections.
Known supported variables
This device is known to support the following variables (values are just examples):
|
battery.charge
|
|
|
battery.charge.low
|
|
|
battery.charge.warning
|
|
|
battery.runtime
|
overflow? |
|
battery.runtime.low
|
|
|
battery.type
|
|
|
battery.voltage
|
|
|
battery.voltage.nominal
|
|
|
device.mfr
|
|
|
device.model
|
|
|
device.serial
|
|
|
device.type
|
|
|
driver.name
|
|
|
driver.parameter.pollfreq
|
|
|
driver.parameter.pollinterval
|
|
|
driver.parameter.port
|
|
|
driver.parameter.synchronous
|
|
|
driver.version
|
|
|
driver.version.data
|
|
|
driver.version.internal
|
|
|
ups.beeper.status
|
|
|
ups.delay.shutdown
|
|
|
ups.firmware
|
|
|
ups.mfr
|
|
|
ups.mfr.date
|
|
|
ups.model
|
|
|
ups.productid
|
|
|
ups.serial
|
|
|
ups.status
|
|
|
ups.timer.reboot
|
|
|
ups.timer.shutdown
|
|
|
ups.vendorid
|
|
About this device
Reported at:
Further system data or configuration examples:
Data sample
Device connected via USB. It is lacking some data like `ups.load`,
`input/output voltages` and so on (visible on older Smart-UPS 1000 RM
that I'm replacing).
Vendor's PowerChute BE reports those values (screenshots in ticket).
I found some topics suggesting that it may use modbus, not sure if that
is the case here (at least manuals don't mention it, nor it is mentioned
in menus).
NOTE: There seem to be multiple hardware revisions of this model.
There are some with firmware 1.x that are not upgradable, mine is
upgradable to 3.8 (as listed here), some can go up to 7.x series.
So even though they all identify as Smart UPS 750-X, they have
different internal model number. I believe the same apply to 1000W
and 1500W models, as they share the same chassis.lsusb or similar tool listingBus 002 Device 006: ID 051d:0003 American Power Conversion UPS
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x051d American Power Conversion
idProduct 0x0003 UPS
bcdDevice 1.06
iManufacturer 1 American Power Conversion
iProduct 2 Smart-UPS X 750 FW:COM 03.8 / UPS 03.8
iSerial 3 <serial>
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0029
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x60
(Missing must-be-set bit!)
Self Powered
Remote Wakeup
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.00
bCountryCode 33 US
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 425
Report Descriptor: (length is 425)
Item(Global): Usage Page, data= [ 0x84 ] 132
Power Device Page
Item(Local ): Usage, data= [ 0x04 ] 4
UPS
Item(Main ): Collection, data= [ 0x01 ] 1
Application
Item(Local ): Usage, data= [ 0x24 ] 36
Power Summary
Item(Main ): Collection, data= [ 0x02 ] 2
Logical
Item(Global): Report ID, data= [ 0x01 ] 1
Item(Local ): Usage, data= [ 0xfe ] 254
iProduct
Item(Local ): String Index, data= [ 0x02 ] 2
Item(Global): Report Size, data= [ 0x08 ] 8
Item(Global): Report Count, data= [ 0x01 ] 1
Item(Global): Logical Minimum, data= [ 0x00 ] 0
Item(Global): Logical Maximum, data= [ 0xff 0x00 ] 255
Item(Main ): Feature, data= [ 0x22 ] 34
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Global): Report ID, data= [ 0x02 ] 2
Item(Local ): Usage, data= [ 0xff ] 255
iSerialNumber
Item(Local ): String Index, data= [ 0x03 ] 3
Item(Main ): Feature, data= [ 0x22 ] 34
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Global): Report ID, data= [ 0x03 ] 3
Item(Local ): Usage, data= [ 0xfd ] 253
iManufacturer
Item(Local ): String Index, data= [ 0x01 ] 1
Item(Main ): Feature, data= [ 0x22 ] 34
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Global): Usage Page, data= [ 0x85 ] 133
Battery System Page
Item(Global): Report ID, data= [ 0x04 ] 4
Item(Local ): Usage, data= [ 0x8f ] 143
iOEMInformation
Item(Local ): String Index, data= [ 0x01 ] 1
Item(Main ): Feature, data= [ 0x22 ] 34
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Global): Report ID, data= [ 0x05 ] 5
Item(Local ): Usage, data= [ 0x89 ] 137
iDeviceChemistry
Item(Local ): String Index, data= [ 0x04 ] 4
Item(Main ): Feature, data= [ 0x22 ] 34
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Global): Report ID, data= [ 0x06 ] 6
Item(Local ): Usage, data= [ 0x8b ] 139
Rechargeable
Item(Main ): Feature, data= [ 0x22 ] 34
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Local ): Usage, data= [ 0x2c ] 44
Capacity Mode
Item(Main ): Feature, data= [ 0x22 ] 34
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Global): Report ID, data= [ 0x0e ] 14
Item(Local ): Usage, data= [ 0x83 ] 131
Design Capacity
Item(Global): Logical Maximum, data= [ 0x64 ] 100
Item(Main ): Feature, data= [ 0x22 ] 34
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Local ): Usage, data= [ 0x67 ] 103
Full Charge Capacity
Item(Main ): Feature, data= [ 0x22 ] 34
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Global): Report ID, data= [ 0x0c ] 12
Item(Local ): Usage, data= [ 0x66 ] 102
Remaining Capacity
Item(Main ): Input, data= [ 0x22 ] 34
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Local ): Usage, data= [ 0x66 ] 102
Remaining Capacity
Item(Main ): Feature, data= [ 0xa2 ] 162
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Volatile Bitfield
Item(Global): Report ID, data= [ 0x10 ] 16
Item(Local ): Usage, data= [ 0x8d ] 141
Capacity Granularity 1
Item(Main ): Feature, data= [ 0x22 ] 34
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Local ): Usage, data= [ 0x8e ] 142
Capacity Granularity 2
Item(Main ): Feature, data= [ 0x22 ] 34
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Global): Report ID, data= [ 0x0f ] 15
Item(Local ): Usage, data= [ 0x8c ] 140
Warning Capacity Limit
Item(Main ): Feature, data= [ 0x22 ] 34
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Global): Report ID, data= [ 0x11 ] 17
Item(Local ): Usage, data= [ 0x29 ] 41
Remaining Capacity Limit
Item(Main ): Feature, data= [ 0xa2 ] 162
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Volatile Bitfield
Item(Global): Report ID, data= [ 0x09 ] 9
Item(Local ): Usage, data= [ 0x85 ] 133
Manufacturer Date
Item(Global): Report Size, data= [ 0x10 ] 16
Item(Global): Logical Maximum, data= [ 0xff 0xff 0x00 0x00 ] 65535
Item(Main ): Feature, data= [ 0xa2 ] 162
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Volatile Bitfield
Item(Global): Report ID, data= [ 0x0d ] 13
Item(Local ): Usage, data= [ 0x68 ] 104
Run Time To Empty
Item(Global): Logical Maximum, data= [ 0xff 0xff 0x00 0x00 ] 65535
Item(Global): Unit, data= [ 0x01 0x10 ] 4097
System: SI Linear, Unit: Seconds
Item(Global): Unit Exponent, data= [ 0x00 ] 0
Unit Exponent: 0
Item(Main ): Input, data= [ 0xa2 ] 162
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Volatile Bitfield
Item(Local ): Usage, data= [ 0x68 ] 104
Run Time To Empty
Item(Main ): Feature, data= [ 0xa2 ] 162
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Volatile Bitfield
Item(Global): Usage Page, data= [ 0x84 ] 132
Power Device Page
Item(Global): Report ID, data= [ 0x12 ] 18
Item(Local ): Usage, data= [ 0x57 ] 87
Delay Before Shutdown
Item(Global): Logical Minimum, data= [ 0xff 0xff ] 65535
Item(Global): Logical Maximum, data= [ 0xff 0x7f ] 32767
Item(Main ): Feature, data= [ 0xa2 ] 162
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Volatile Bitfield
Item(Global): Report ID, data= [ 0x13 ] 19
Item(Local ): Usage, data= [ 0x55 ] 85
Delay Before Reboot
Item(Global): Report Size, data= [ 0x18 ] 24
Item(Global): Logical Minimum, data= [ 0xff 0xff 0xff 0xff ] -1
Item(Global): Logical Maximum, data= [ 0x18 0xc5 0x13 0x00 ] 1295640
Item(Main ): Feature, data= [ 0xa2 ] 162
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Volatile Bitfield
Item(Global): Usage Page, data= [ 0x85 ] 133
Battery System Page
Item(Global): Report ID, data= [ 0x08 ] 8
Item(Local ): Usage, data= [ 0x2a ] 42
Remaining Time Limit
Item(Global): Logical Maximum, data= [ 0x64 0x05 0x00 0x00 ] 1380
Item(Global): Logical Minimum, data= [ 0x78 0x00 ] 120
Item(Main ): Input, data= [ 0x22 ] 34
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Local ): Usage, data= [ 0x2a ] 42
Remaining Time Limit
Item(Main ): Feature, data= [ 0xa2 ] 162
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Volatile Bitfield
Item(Global): Usage Page, data= [ 0x84 ] 132
Power Device Page
Item(Global): Report ID, data= [ 0x0a ] 10
Item(Local ): Usage, data= [ 0x40 ] 64
Config Voltage
Item(Global): Report Size, data= [ 0x10 ] 16
Item(Global): Logical Minimum, data= [ 0x00 ] 0
Item(Global): Logical Maximum, data= [ 0xff 0xff 0x00 0x00 ] 65535
Item(Global): Unit, data= [ 0x21 0xd1 0xf0 0x00 ] 15782177
System: SI Linear, Unit: Centimeter^2*Gram*Seconds^-3*Ampere^-1
Item(Global): Unit Exponent, data= [ 0x05 ] 5
Unit Exponent: 5
Item(Main ): Feature, data= [ 0x22 ] 34
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Global): Report ID, data= [ 0x0b ] 11
Item(Local ): Usage, data= [ 0x30 ] 48
Voltage
Item(Main ): Feature, data= [ 0xa2 ] 162
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Volatile Bitfield
Item(Global): Report ID, data= [ 0x14 ] 20
Item(Local ): Usage, data= [ 0x5a ] 90
Audible Alarm Control
Item(Global): Report Size, data= [ 0x08 ] 8
Item(Global): Logical Minimum, data= [ 0x01 ] 1
Item(Global): Logical Maximum, data= [ 0x03 ] 3
Item(Global): Unit, data= [ 0x00 ] 0
System: None, Unit: (None)
Item(Global): Unit Exponent, data= [ 0x00 ] 0
Unit Exponent: 0
Item(Main ): Input, data= [ 0x22 ] 34
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Local ): Usage, data= [ 0x5a ] 90
Audible Alarm Control
Item(Main ): Feature, data= [ 0xa2 ] 162
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Volatile Bitfield
Item(Local ): Usage, data= [ 0x02 ] 2
Present Status
Item(Main ): Collection, data= [ 0x02 ] 2
Logical
Item(Global): Report ID, data= [ 0x07 ] 7
Item(Global): Usage Page, data= [ 0x85 ] 133
Battery System Page
Item(Local ): Usage, data= [ 0x44 ] 68
Charging
Item(Global): Report Size, data= [ 0x01 ] 1
Item(Global): Logical Minimum, data= [ 0x00 ] 0
Item(Global): Logical Maximum, data= [ 0x01 ] 1
Item(Main ): Input, data= [ 0xa2 ] 162
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Volatile Bitfield
Item(Local ): Usage, data= [ 0x44 ] 68
Charging
Item(Main ): Feature, data= [ 0xa2 ] 162
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Volatile Bitfield
Item(Local ): Usage, data= [ 0x45 ] 69
Discharging
Item(Main ): Input, data= [ 0xa2 ] 162
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Volatile Bitfield
Item(Local ): Usage, data= [ 0x45 ] 69
Discharging
Item(Main ): Feature, data= [ 0xa2 ] 162
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Volatile Bitfield
Item(Local ): Usage, data= [ 0xd0 ] 208
AC Present
Item(Main ): Input, data= [ 0xa2 ] 162
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Volatile Bitfield
Item(Local ): Usage, data= [ 0xd0 ] 208
AC Present
Item(Main ): Feature, data= [ 0xa2 ] 162
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Volatile Bitfield
Item(Local ): Usage, data= [ 0xd1 ] 209
Battery Present
Item(Main ): Input, data= [ 0xa2 ] 162
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Volatile Bitfield
Item(Local ): Usage, data= [ 0xd1 ] 209
Battery Present
Item(Main ): Feature, data= [ 0xa2 ] 162
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Volatile Bitfield
Item(Local ): Usage, data= [ 0x42 ] 66
Below Remaining Capacity Limit
Item(Main ): Input, data= [ 0xa2 ] 162
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Volatile Bitfield
Item(Local ): Usage, data= [ 0x42 ] 66
Below Remaining Capacity Limit
Item(Main ): Feature, data= [ 0xa2 ] 162
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Volatile Bitfield
Item(Global): Usage Page, data= [ 0x84 ] 132
Power Device Page
Item(Local ): Usage, data= [ 0x68 ] 104
Shutdown Requested
Item(Main ): Input, data= [ 0xa2 ] 162
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Volatile Bitfield
Item(Local ): Usage, data= [ 0x68 ] 104
Shutdown Requested
Item(Main ): Feature, data= [ 0xa2 ] 162
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Volatile Bitfield
Item(Local ): Usage, data= [ 0x69 ] 105
Shutdown Imminent
Item(Main ): Input, data= [ 0xa2 ] 162
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Volatile Bitfield
Item(Local ): Usage, data= [ 0x69 ] 105
Shutdown Imminent
Item(Main ): Feature, data= [ 0xa2 ] 162
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Volatile Bitfield
Item(Global): Usage Page, data= [ 0x85 ] 133
Battery System Page
Item(Local ): Usage, data= [ 0x43 ] 67
Remaining Time Limit Expired
Item(Main ): Input, data= [ 0xa2 ] 162
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Volatile Bitfield
Item(Local ): Usage, data= [ 0x43 ] 67
Remaining Time Limit Expired
Item(Main ): Feature, data= [ 0xa2 ] 162
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Volatile Bitfield
Item(Global): Usage Page, data= [ 0x84 ] 132
Power Device Page
Item(Local ): Usage, data= [ 0x73 ] 115
Communication Lost
Item(Main ): Input, data= [ 0xa2 ] 162
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Volatile Bitfield
Item(Local ): Usage, data= [ 0x73 ] 115
Communication Lost
Item(Main ): Feature, data= [ 0xa2 ] 162
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Volatile Bitfield
Item(Global): Usage Page, data= [ 0x85 ] 133
Battery System Page
Item(Local ): Usage, data= [ 0x4b ] 75
Need Replacement
Item(Main ): Input, data= [ 0xa2 ] 162
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Volatile Bitfield
Item(Local ): Usage, data= [ 0x4b ] 75
Need Replacement
Item(Main ): Feature, data= [ 0xa2 ] 162
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Volatile Bitfield
Item(Global): Usage Page, data= [ 0x84 ] 132
Power Device Page
Item(Local ): Usage, data= [ 0x65 ] 101
Overload
Item(Main ): Input, data= [ 0xa2 ] 162
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Volatile Bitfield
Item(Local ): Usage, data= [ 0x65 ] 101
Overload
Item(Main ): Feature, data= [ 0xa2 ] 162
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Volatile Bitfield
Item(Global): Usage Page, data= [ 0x85 ] 133
Battery System Page
Item(Local ): Usage, data= [ 0xdb ] 219
Voltage Not Regulated
Item(Main ): Input, data= [ 0xa2 ] 162
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Volatile Bitfield
Item(Local ): Usage, data= [ 0xdb ] 219
Voltage Not Regulated
Item(Main ): Feature, data= [ 0xa2 ] 162
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Volatile Bitfield
Item(Global): Usage Page, data= [ 0x86 0xff ] 65414
(null)
Item(Local ): Usage, data= [ 0x80 ] 128
(null)
Item(Main ): Input, data= [ 0xa2 ] 162
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Volatile Bitfield
Item(Local ): Usage, data= [ 0x80 ] 128
(null)
Item(Main ): Feature, data= [ 0xa2 ] 162
Data Variable Absolute No_Wrap Linear
No_Preferred_State No_Null_Position Volatile Bitfield
Item(Global): Report Count, data= [ 0x03 ] 3
Item(Main ): Input, data= [ 0x01 ] 1
Constant Array Absolute No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Main ): Feature, data= [ 0x01 ] 1
Constant Array Absolute No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Main ): End Collection, data=none
Item(Main ): End Collection, data=none
Item(Global): Usage Page, data= [ 0x86 0xff ] 65414
(null)
Item(Global): Report ID, data= [ 0x89 ] 137
Item(Local ): Usage, data= [ 0xfd ] 253
(null)
Item(Global): Logical Minimum, data= [ 0x00 ] 0
Item(Global): Logical Maximum, data= [ 0xff 0x00 ] 255
Item(Global): Report Size, data= [ 0x08 ] 8
Item(Global): Report Count, data= [ 0x3f ] 63
Item(Main ): Input, data= [ 0x02 ] 2
Data Variable Absolute No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Global): Report ID, data= [ 0x90 ] 144
Item(Local ): Usage, data= [ 0xfc ] 252
(null)
Item(Global): Logical Minimum, data= [ 0x00 ] 0
Item(Global): Logical Maximum, data= [ 0xff 0x00 ] 255
Item(Global): Report Size, data= [ 0x08 ] 8
Item(Global): Report Count, data= [ 0x3f ] 63
Item(Main ): Output, data= [ 0x02 ] 2
Data Variable Absolute No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Main ): End Collection, data=none
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 10
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 10
can't get device qualifier: Resource temporarily unavailable
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0002
(Bus Powered)
Remote Wakeup EnabledReport #2 with driver usbhid-ups (detailed comments available)
This device is known to work with driver usbhid-ups.
You can grab a dummy-ups compliant .dev file to simulate this device clicking here.
Some more detailed comments are available after the "Known supported…" sections.
Known supported variables
This device is known to support the following variables (values are just examples):
|
battery.charge
|
|
|
battery.charge.low
|
|
|
battery.charge.warning
|
|
|
battery.runtime
|
|
|
battery.runtime.low
|
|
|
battery.type
|
|
|
battery.voltage
|
|
|
battery.voltage.nominal
|
|
|
device.mfr
|
|
|
device.model
|
|
|
device.serial
|
|
|
device.type
|
|
|
driver.name
|
|
|
driver.parameter.pollfreq
|
|
|
driver.parameter.pollinterval
|
|
|
driver.parameter.port
|
|
|
driver.parameter.synchronous
|
|
|
driver.version
|
|
|
driver.version.data
|
|
|
driver.version.internal
|
|
|
driver.version.usb
|
|
|
ups.beeper.status
|
|
|
ups.delay.shutdown
|
|
|
ups.firmware
|
|
|
ups.mfr
|
|
|
ups.mfr.date
|
|
|
ups.model
|
|
|
ups.productid
|
|
|
ups.serial
|
|
|
ups.status
|
|
|
ups.timer.reboot
|
|
|
ups.timer.shutdown
|
|
|
ups.vendorid
|
|
About this device
Reported at:
Further system data or configuration example:
Data sample
Similar to `APC__Smart-UPS_X_750__usbhid-ups__2.7.4__01.dev` - same device
tested with a custom build of NUT, checking if it would help (did not then).
I built HEAD (like previously), run `usbhid-ups -s ups -x port=auto`,
then `upsd` and `upsc` output is as pasted below... Thus nothing new,
except in driver fields.
