Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Aviem Systems.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.7.4

Report #1

This device is known to work with driver blazer_usb. It may also work with driver nutdrv_qx.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100

battery.voltage

27.70

battery.voltage.high

26.00

battery.voltage.low

20.80

battery.voltage.nominal

24.0

device.type

ups

driver.name

blazer_usb

driver.parameter.offdelay

120

driver.parameter.ondelay

240

driver.parameter.pollinterval

2

driver.parameter.port

auto

driver.parameter.synchronous

no

driver.version

2.7.4

driver.version.internal

0.12

input.current.nominal

9.0

input.frequency

49.6

input.frequency.nominal

50

input.voltage

230.8

input.voltage.fault

231.3

input.voltage.nominal

220

output.voltage

231.3

ups.beeper.status

enabled

ups.delay.shutdown

120

ups.delay.start

14400

ups.load

10

ups.productid

5161

ups.status

OL

ups.type

offline / line interactive

ups.vendorid

0665