Click here to see reports of other supported models from Cyber Power Systems.
|
When a user reports that a variable/command is not right then it will be highlighted by a red underline. Bad values/ranges/etc… will get a red dashed outline or red solid left border. The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left. |
2.7.3
Report #1 with driver usbhid-ups (detailed comments available)
This device is known to work with driver usbhid-ups.
You can grab a dummy-ups compliant .dev file to simulate this device clicking here.
Some more detailed comments are available after the "Known supported…" sections.
Known supported variables
This device is known to support the following variables (values are just examples):
|
battery.charge
|
|
|
battery.charge.low
|
This variable can be set through upsrw to a string value upto the length of |
|
battery.charge.warning
|
|
|
battery.mfr.date
|
|
|
battery.runtime
|
|
|
battery.runtime.low
|
This variable can be set through upsrw to a string value upto the length of |
|
battery.type
|
|
|
battery.voltage
|
see CP1500PFCLCD; might be constant |
|
battery.voltage.nominal
|
|
|
device.mfr
|
|
|
device.model
|
|
|
device.serial
|
|
|
device.type
|
|
|
driver.name
|
|
|
driver.parameter.pollfreq
|
|
|
driver.parameter.pollinterval
|
|
|
driver.parameter.port
|
|
|
driver.parameter.synchronous
|
|
|
driver.version
|
|
|
driver.version.data
|
|
|
driver.version.internal
|
|
|
input.transfer.high
|
This variable can be set through upsrw to a string value upto the length of |
|
input.transfer.low
|
This variable can be set through upsrw to a string value upto the length of |
|
input.voltage
|
|
|
input.voltage.nominal
|
|
|
output.voltage
|
varies, but does not match LCD |
|
ups.beeper.status
|
|
|
ups.delay.shutdown
|
This variable can be set through upsrw to a string value upto the length of |
|
ups.delay.start
|
This variable can be set through upsrw to a string value upto the length of |
|
ups.load
|
|
|
ups.mfr
|
|
|
ups.model
|
does not match barcode or other serial number on device. |
|
ups.productid
|
|
|
ups.realpower.nominal
|
|
|
ups.serial
|
|
|
ups.status
|
|
|
ups.test.result
|
|
|
ups.timer.shutdown
|
|
|
ups.timer.start
|
|
|
ups.vendorid
|
|
Known supported commands
This device is known to support the following NUT’s instant commands:
-
beeper.disable
-
beeper.enable
-
beeper.mute
-
beeper.off
-
beeper.on
-
load.off
-
load.off.delay
-
load.on
-
load.on.delay
-
shutdown.return
-
shutdown.stayoff
-
shutdown.stop
-
test.battery.start.deep
-
test.battery.start.quick
-
test.battery.stop
About this device
Shutdown sequence tested with NUT 2.7.3.
Reported at:
