Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Cyber Power Systems.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.7.4

Report #1 with driver usbhid-ups (detailed comments available)

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.voltage

13.6

battery.voltage.nominal

12

device.mfr

CPS

device.model

OR500LCDRM1Ua

device.serial

GA4JW2000855

device.type

ups

driver.name

usbhid-ups

driver.parameter.pollfreq

30

driver.parameter.pollinterval

15

driver.parameter.port

auto

driver.parameter.synchronous

no

driver.version

2.7.4

driver.version.data

CyberPower HID 0.4

driver.version.internal

0.41

input.voltage

118.0

input.voltage.nominal

120

output.voltage

135.0

Should be closer to 120

ups.beeper.status

enabled

ups.delay.shutdown

20

ups.delay.start

30

ups.load

63

ups.mfr

CPS

ups.model

OR500LCDRM1Ua

ups.productid

0601

ups.realpower.nominal

300

ups.serial

GA4JW2000855

ups.status

OL

ups.test.result

No test initiated

ups.timer.shutdown

-60

ups.timer.start

-60

ups.vendorid

0764

About this device

Note wrong output.voltage

Reported at: