Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Digitus.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.7.4

Report #1 with driver blazer_usb (detailed comments available)

This device is known to work with driver blazer_usb. It may also work with driver nutdrv_qx.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100

battery.voltage

40.86

battery.voltage.high

39.00

battery.voltage.low

31.20

battery.voltage.nominal

36.0

device.mfr


device.model

HV 1K5

device.type

ups

driver.name

blazer_usb

driver.parameter.pollinterval

2

driver.parameter.port

auto

driver.parameter.productid

5161

driver.parameter.subdriver

cypress

driver.parameter.synchronous

no

driver.parameter.vendorid

0665

driver.version

2.7.4

driver.version.internal

0.12

input.current.nominal

6.0

input.frequency

50.0

input.frequency.nominal

50

input.voltage

234.3

input.voltage.fault

234.3

input.voltage.nominal

230

output.voltage

234.4

ups.beeper.status

enabled

ups.delay.shutdown

30

ups.delay.start

180

ups.firmware

00938.02

ups.load

14

ups.mfr


ups.model

HV 1K5

ups.productid

5161

ups.status

OL BYPASS

ups.temperature

24.3

ups.type

online

ups.vendorid

0665

About this device

I tested the Digitus DN-170040 and DN-170041 with the blazer_usb driver and it works as expected. The same model was also sold as Voltronic Power GalleonX9-RT LCD-1-3K.

It is connected through USB and is recognized as:

Bus 001 Device 002: ID 0665:5161 Cypress Semiconductor USB to Serial

See also: DigitusDN-170041nutdrv_qx2.7.401.dev

Reported at:

Vendor/Manufacturer information:

Further system data or configuration example:

Driver configuration
[digitus]
    driver = blazer_usb
    port = auto
    vendorid = 0665
    productid = 5161
    subdriver = cypress
    desc = "Digitus DN-170041"

2.7.4

Report #1 with driver nutdrv_qx (detailed comments available)

This device is known to work with driver nutdrv_qx.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100

battery.energysave

no

battery.packs

1

battery.protection

yes

battery.runtime

19620

battery.voltage

41.00

battery.voltage.high

39

battery.voltage.low

31.2

battery.voltage.nominal

36

device.model

1K5

device.type

ups

driver.name

nutdrv_qx

driver.parameter.chargetime

14400

driver.parameter.pollfreq

30

driver.parameter.pollinterval

2

driver.parameter.port

auto

driver.parameter.runtimecal

210,100,660,50

driver.parameter.synchronous

no

driver.version

2.7.4

driver.version.data

Voltronic 0.06

driver.version.internal

0.28

input.current.nominal

6.0

input.frequency

50.0

input.frequency.nominal

50.0

input.phases

1

input.transfer.high

242

input.transfer.high.max

254

input.transfer.high.min

237

input.transfer.low

218

input.transfer.low.max

223

input.transfer.low.min

206

input.voltage

234.0

input.voltage.nominal

230.0

outlet.0.switchable

no

output.current

1.0

output.current.nominal

6

output.frequency

50.0

output.frequency.nominal

50.0

output.phases

1

output.power.maximum.percent

16

output.power.minimum.percent

2

output.powerfactor

0.9

output.voltage

234.0

output.voltage.nominal

230.0

ups.beeper.status

enabled

ups.delay.shutdown

30

ups.delay.start

180

ups.firmware

00938.02

ups.firmware.aux

P01

ups.load

15

ups.power.nominal

1500

ups.productid

5161

ups.start.auto

yes

ups.start.battery

yes

ups.status

OL BYPASS

ups.temperature

24.6

ups.type

online

ups.vendorid

0665

About this device

See also DigitusDN-170041blazer_usb2.7.401.dev

nutdrv_qx seems to give more information than blazer_usb. It even detects the right voltronic protocol as well as all settings from the ups:

:; upsdrvctl start digitus
Network UPS Tools - UPS driver controller 2.7.4
Network UPS Tools - Generic Q* USB/Serial driver 0.28 (2.7.4)
USB communication driver 0.33
Using protocol: Voltronic 0.06
device.serial: UPS reported a non-significant serial [00000000000000]
battery_number: 3
battery_number, settable range: 1..9
bypass_alarm: enabled
battery_alarm: enabled
bypass_when_off: disabled
alarm_control: enabled
converter_mode: disabled
eco_mode: enabled
bypass_forbidding: disabled
site_fault_detection: disabled
advanced_eco_mode: enabled
max_bypass_volt: 264
max_bypass_volt, settable range: 230..264
min_bypass_volt: 170
min_bypass_volt, settable range: 170..220
max_bypass_freq: 53.0
max_bypass_freq, settable range: 51.0..60.0
min_bypass_freq: 47.0
min_bypass_freq, settable range: 40.0..49.0

Reported at:

Further system data or configuration example:

Driver configuration
[digitus]
    driver = nutdrv_qx
    port = auto
    desc = "Digitus DN-170041"
    default.battery.voltage.high = 39
        default.battery.voltage.low = 31.2
        default.battery.voltage.nominal = 36
    runtimecal = 210,100,660,50
        chargetime = 14400

    # The values are set according the datasheet.