Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Eaton.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.2.2

Report #1 with driver usbhid-ups (detailed comments available)

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100

battery.charge.low

30

battery.runtime

5525

battery.type

PbAc

driver.name

usbhid-ups

driver.parameter.pollfreq

30

driver.parameter.pollinterval

2

driver.parameter.port

auto

driver.parameter.vendorid

0463

driver.version

2.2.2

driver.version.data

MGE HID 1.10

driver.version.internal

0.33

input.transfer.high

264

input.transfer.low

184

outlet.0.desc

Main Outlet

outlet.0.id

1

outlet.0.switchable

no

outlet.1.desc

PowerShare Outlet 1

outlet.1.id

2

outlet.1.status

on

outlet.1.switchable

no

outlet.2.desc

PowerShare Outlet 2

output.frequency.nominal

50

output.voltage

230.0

output.voltage.nominal

230

ups.beeper.status

enabled

ups.delay.shutdown

20

ups.delay.start

30

ups.load

0

ups.mfr

EATON

ups.model

Ellipse 1000

ups.power.nominal

1000

ups.productid

ffff

ups.serial

000000000

ups.status

OL CHRG

ups.timer.shutdown

-1

ups.timer.start

-10

ups.vendorid

0463

Report #2 with driver mge-shut (detailed comments available)

This device is known to work with driver mge-shut.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100

battery.charge.low

30

battery.runtime

1981

driver.name

mge-shut

driver.parameter.pollinterval

2

driver.parameter.port

/dev/ttyS0

driver.version

2.2.2

driver.version.internal

0.66

outlet.0.desc

Main Outlet

outlet.0.id

1

outlet.0.switchable

0

outlet.1.desc

PowerShare Outlet 1

outlet.1.id

2

outlet.1.switchable

0

output.voltage

230

ups.delay.shutdown

-1

ups.delay.start

-1

ups.load

19

ups.mfr

MGE UPS SYSTEMS

ups.model

Ellipse 1000

ups.power.nominal

1000

ups.serial

000000000

ups.status

OL CHRG