Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from HP.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.3.0

Report #1 with driver usbhid-ups (detailed comments available)

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100

battery.charge.low

10

battery.charge.warning

30

battery.temperature

35.9

battery.type

PbAC

battery.voltage

54.8

battery.voltage.nominal

48.0

driver.name

usbhid-ups

driver.parameter.pollfreq

30

driver.parameter.pollinterval

2

driver.parameter.port

auto

driver.version

2.3.0-1525M

driver.version.data

TrippLite HID 0.3 (experimental)

driver.version.internal

0.33

input.frequency

49.9

input.transfer.high

278.0

input.transfer.low

156.0

input.voltage

248.1

input.voltage.nominal

230

output.frequency

49.9

output.frequency.nominal

50

output.voltage

218.0

output.voltage.nominal

230

ups.beeper.status

enabled

ups.delay.shutdown

20

ups.delay.start

30

ups.load

10

ups.mfr

Hewlett Packard

ups.model

R/T2200 INTL

ups.power.nominal

2200

ups.productid

1f0a

ups.serial

2cj7431789

ups.status

OL TRIM

ups.timer.reboot

-1

ups.timer.shutdown

-1

ups.timer.start

-1

ups.vendorid

03f0

ups.watchdog.status

0