Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from HP.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.4.1

Report #1 with driver usbhid-ups (detailed comments available)

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

91

battery.charge.low

10

This variable can be set through upsrw to a string value.

battery.charge.warning

30

battery.temperature

37.9

battery.type

PbAc

battery.voltage

25.1

battery.voltage.nominal

24.0

driver.name

usbhid-ups

driver.parameter.pollfreq

30

driver.parameter.pollinterval

2

driver.parameter.port

auto

driver.version

2.4.1

driver.version.data

TrippLite HID 0.4

driver.version.internal

0.34

input.frequency

49.9

input.transfer.high

277.0

This variable can be set through upsrw to a string value.

input.transfer.low

158.0

This variable can be set through upsrw to a string value.

input.voltage

224.4

input.voltage.nominal

230

output.frequency

49.9

output.frequency.nominal

50

output.voltage

223.3

output.voltage.nominal

230

ups.beeper.status

enabled

ups.delay.shutdown

20

This variable can be set through upsrw to a string value.

ups.delay.start

30

This variable can be set through upsrw to a string value.

ups.load

59

ups.mfr

Hewlett-Packard

ups.model

T750 INTL

ups.power.nominal

750

ups.productid

1f06

ups.serial

2CJ5380638

ups.status

OL CHRG

ups.timer.reboot

-1

ups.timer.shutdown

-1

ups.timer.start

-1

ups.vendorid

03f0

Known supported commands

This device is known to support the following NUT’s instant commands:

  • beeper.disable

  • beeper.enable

  • beeper.mute

  • beeper.off

  • beeper.on

  • load.off

  • load.off.delay

  • load.on

  • load.on.delay

  • shutdown.reboot

  • shutdown.return

  • shutdown.stayoff

  • shutdown.stop

  • test.battery.start.deep

  • test.battery.start.quick

  • test.battery.stop