Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from MGE UPS SYSTEMS.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.4.3

Report #1 with driver usbhid-ups (detailed comments available)

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100

battery.charge.low

30

This variable can be set through upsrw to a string value.

battery.runtime

2281

battery.type

PbAc

device.mfr

MGE UPS SYSTEMS

device.model

Protection Center 675

device.serial

1HKG25025

device.type

ups

driver.name

usbhid-ups

driver.parameter.offdelay

30

driver.parameter.ondelay

60

driver.parameter.pollfreq

30

driver.parameter.pollinterval

2

driver.parameter.port

auto

driver.version

2.4.3

driver.version.data

MGE HID 1.18

driver.version.internal

0.34

input.transfer.high

264

This variable can be set through upsrw to a string value.

input.transfer.low

184

This variable can be set through upsrw to a string value.

outlet.1.desc

PowerShare Outlet 1

This variable can be set through upsrw to a string value.

outlet.1.id

2

outlet.1.status

on

outlet.1.switchable

no

outlet.desc

Main Outlet

This variable can be set through upsrw to a string value.

outlet.id

1

outlet.switchable

no

output.frequency.nominal

50

output.voltage

230.0

output.voltage.nominal

230

This variable can be set through upsrw to one of the following values:

  • 220

  • 230

  • 240

ups.beeper.status

enabled

ups.delay.shutdown

30

This variable can be set through upsrw to a string value.

ups.delay.start

60

This variable can be set through upsrw to a string value.

ups.load

12

ups.mfr

MGE UPS SYSTEMS

ups.model

Protection Center 675

ups.power.nominal

670

ups.productid

ffff

ups.serial

1HKG25025

ups.status

OL CHRG

ups.timer.shutdown

-1

ups.timer.start

-10

ups.vendorid

0463