Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from OptiUPS.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.7.1

Report #1 with driver powercom (detailed comments available)

This device is known to work with driver powercom.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100.0

device.mfr

PowerCom

device.model

OPTI-575

device.serial

Unknown

device.type

ups

driver.name

powercom

driver.parameter.pollinterval

2

driver.parameter.port

/dev/ttyUSB0

driver.parameter.type

OPTI

driver.version

2.7.1-signed-8-gb11d66f

driver.version.internal

0.14

input.frequency

50.00

input.voltage

224.0

input.voltage.nominal

230

output.frequency

50.00

output.voltage

224.0

ups.load

0.0

ups.mfr

PowerCom

ups.model

OPTI-575

ups.model.type

OPTI

ups.serial

Unknown

ups.status

OL