Click here to see reports of other supported models from PowerWalker.
|
When a user reports that a variable/command is not right then it will be highlighted by a red underline. Bad values/ranges/etc… will get a red dashed outline or red solid left border. The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left. |
2.7.4
Report #1 with driver usbhid-ups (detailed comments available)
This device is known to work with driver usbhid-ups.
You can grab a dummy-ups compliant .dev file to simulate this device clicking here.
Some more detailed comments are available after the "Known supported…" sections.
Known supported variables
This device is known to support the following variables (values are just examples):
|
battery.charge
|
|
|
battery.charge.low
|
|
|
battery.charge.warning
|
|
|
battery.runtime
|
|
|
battery.runtime.low
|
|
|
battery.type
|
|
|
device.mfr
|
|
|
device.model
|
|
|
device.serial
|
|
|
device.type
|
|
|
driver.name
|
|
|
driver.parameter.bus
|
|
|
driver.parameter.pollfreq
|
|
|
driver.parameter.pollinterval
|
|
|
driver.parameter.port
|
|
|
driver.parameter.synchronous
|
|
|
driver.parameter.vendorid
|
|
|
driver.version
|
|
|
driver.version.data
|
|
|
driver.version.internal
|
|
|
input.voltage
|
|
|
outlet.1.status
|
|
|
output.frequency
|
|
|
output.frequency.nominal
|
|
|
output.voltage
|
|
|
output.voltage.nominal
|
|
|
ups.beeper.status
|
|
|
ups.delay.shutdown
|
|
|
ups.delay.start
|
|
|
ups.load
|
|
|
ups.mfr
|
|
|
ups.model
|
|
|
ups.power.nominal
|
|
|
ups.productid
|
|
|
ups.serial
|
|
|
ups.status
|
|
|
ups.test.result
|
|
|
ups.timer.shutdown
|
|
|
ups.timer.start
|
|
|
ups.type
|
|
|
ups.vendorid
|
|
About this device
Not sure what changes they made in the latest stable debian bullseye using nut-server 2.7.4 version, but these UPSes are now using the MGE HID driver version, previous was the Liebert driver which wasn’t stable and missing a load of features, like battery test. So far my config posted with the report works and is stable.
Reported at:
Further system data or configuration examples:
# NUT configuration files
:; cat ups.conf
maxretry = 3
pollinterval = 20
user = nut
[powerwalker-650]
driver = usbhid-ups
port = auto
desc = "PowerWalker VI 650 SH"
vendorid = 06da
bus = "003"
override.battery.charge.warning = 30
override.battery.charge.low = 15
override.battery.runtime.low = 180
override.ups.model = "PowerWalker VI 650 SH"
override.driver.parameter.pollfreq = 40
[powerwalker-1200]
driver = usbhid-ups
port = auto
desc = "PowerWalker VI 1200 SH"
vendorid = 06da
bus = "004"
override.battery.charge.warning = 30
override.battery.charge.low = 15
override.battery.runtime.low = 180
override.ups.model = "PowerWalker VI 1200 SH"
override.driver.parameter.pollfreq = 40
:; cat upsmon.conf
POLLFREQ 20
POLLFREQALERT 10
DEADTIME 60 ### 3x the POLLFREQ
:; cat upsd.conf
MAXAGE 40upscmd -l powerwalker-650@localhost listing# TODO: Convert to CMD:... markup
:; upscmd -l powerwalker-650@localhost
Instant commands supported on UPS [powerwalker-650]:
beeper.disable - Disable the UPS beeper
beeper.enable - Enable the UPS beeper
beeper.mute - Temporarily mute the UPS beeper
beeper.off - Obsolete (use beeper.disable or beeper.mute)
beeper.on - Obsolete (use beeper.enable)
load.off - Turn off the load immediately
load.off.delay - Turn off the load with a delay (seconds)
load.on - Turn on the load immediately
load.on.delay - Turn on the load with a delay (seconds)
shutdown.return - Turn off the load and return when power is back
shutdown.stayoff - Turn off the load and remain off
shutdown.stop - Stop a shutdown in progress
test.battery.start.deep - Start a deep battery test
test.battery.start.quick - Start a quick battery test
test.battery.stop - Stop the battery test
