Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Powercool.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.7.4.1

Report #1

This device is known to work with driver nutdrv_qx.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100

battery.voltage

40.50

battery.voltage.high

39.00

battery.voltage.low

31.20

battery.voltage.nominal

36.0

device.type

ups

driver.flag.noscanlangid

enabled

driver.flag.novendor

enabled

driver.name

nutdrv_qx

driver.parameter.langid_fix

0x0409

driver.parameter.pollfreq

30

driver.parameter.pollinterval

2

driver.parameter.port

auto

driver.parameter.productid

0000

driver.parameter.protocol

hunnox

driver.parameter.synchronous

no

driver.parameter.vendorid

0001

driver.version

2.7.4-2077-g699bf8b4

driver.version.data

Hunnox 0.01

driver.version.internal

0.28

input.current.nominal

6.9

input.frequency

50.0

input.frequency.nominal

50

input.voltage

241.0

input.voltage.fault

0.0

input.voltage.nominal

230

output.voltage

241.0

ups.beeper.status

enabled

ups.delay.shutdown

60

ups.delay.start

0

ups.load

12

ups.productid

0000

ups.status

OL

ups.temperature

28.0

ups.type

offline / line interactive

ups.vendorid

0001