Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Tripp Lite.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.1.0

Report #1 with driver newhidups (detailed comments available)

This device is known to work with driver newhidups, now replaced by the usbhid-ups one.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

53

battery.type

PbAc

battery.voltage

12.3

battery.voltage.nominal

12.0

driver.name

newhidups

driver.parameter.port

auto

driver.version

2.1.0

driver.version.data

TrippLite HID 0.1 (experimental)

driver.version.internal

0.30

input.frequency

59.8

input.voltage

116.7

input.voltage.nominal

120

output.frequency.nominal

60

output.voltage.nominal

120

ups.beeper.status

disabled

ups.delay.reboot

65535

ups.delay.shutdown

65535

ups.mfr

Tripp Lite

ups.model

TRIPP LITE UPS

ups.power.nominal

1000

ups.serial

692195 B

ups.status

OL CHRG

Report #2 with driver usbhid-ups (detailed comments available)

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100

battery.type


battery.voltage

13.5

battery.voltage.nominal

12.0

driver.name

usbhid-ups

driver.parameter.pollinterval

10

driver.parameter.port

auto

driver.version

2.1.0

driver.version.data

TrippLite HID 0.1 (experimental)

driver.version.internal

0.30

input.frequency

59.8

input.voltage

405.4

The value is wrong.

input.voltage.nominal

120

ups.beeper.status

enabled

ups.delay.reboot

65535

ups.delay.shutdown

65535

ups.mfr

Tripp Lite

ups.model

TRIPP LITE UPS

ups.power.nominal

1000

ups.productid

2005

ups.serial

692199 B

ups.status

OL CHRG

ups.test.result

0

ups.vendorid

09ae