Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Tripp Lite.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.1.0

Report #1 with driver newhidups (detailed comments available)

This device is known to work with driver newhidups, now replaced by the usbhid-ups one.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100

battery.type

PbAc

battery.voltage

0.0

battery.voltage.nominal

12.0

driver.name

newhidups

driver.parameter.port

/dev/usb/hiddev0

driver.parameter.productid

2005

driver.version

2.1.0

driver.version.data

TrippLite HID 0.1 (experimental)

driver.version.internal

0.30

input.frequency

59.9

input.voltage

119.0

input.voltage.nominal

120

output.frequency.nominal

60

output.voltage

166.0

The output voltage is not reported correctly.

output.voltage.nominal

120

ups.beeper.status

enabled

ups.delay.reboot

65535

ups.delay.shutdown

65535

ups.mfr

Tripp Lite

ups.model

TRIPP LITE UPS

ups.power.nominal

900

ups.serial

692195 B

ups.status

OL CHRG

ups.test.result

Done and passed