Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from UNITEK.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.6.1

Report #1 with driver blazer_usb (detailed comments available)

This device is known to work with driver blazer_usb. It may also work with driver nutdrv_qx.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.voltage

28.60

battery.voltage.nominal

24.0

beeper.status

disabled

device.mfr

UNITEK

device.model

Alph1200Sx

device.type

ups

driver.name

blazer_usb

driver.parameter.pollinterval

2

driver.parameter.port

auto

driver.version

2.6.1

driver.version.internal

0.03

input.current.nominal

4.3

input.frequency

50.0

input.frequency.nominal

50

input.voltage

230.0

input.voltage.fault

230.0

input.voltage.nominal

230

output.voltage

202.0

ups.delay.shutdown

30

ups.delay.start

180

ups.firmware

A1

ups.load

5

ups.mfr

UNITEK

ups.model

Alph1200Sx

ups.productid

0001

ups.status

OL

ups.temperature

32.0

ups.type

offline / line interactive

ups.vendorid

0f03