Click here to see reports of other supported models from APC.
|
When a user reports that a variable/command is not right then it will be highlighted by a red underline. Bad values/ranges/etc… will get a red dashed outline or red solid left border. The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left. |
2.8.3.1
Report #1 with driver _usbhid-ups (detailed comments available)
This device is known to work with driver _usbhid-ups.
You can grab a dummy-ups compliant .dev file to simulate this device clicking here.
Some more detailed comments are available after the "Known supported…" sections.
Known supported variables
This device is known to support the following variables (values are just examples):
|
battery.charge
|
|
|
battery.charge.low
|
|
|
battery.mfr.date
|
|
|
battery.runtime
|
|
|
battery.runtime.low
|
|
|
battery.type
|
|
|
battery.voltage
|
|
|
battery.voltage.nominal
|
|
|
device.mfr
|
|
|
device.model
|
|
|
device.serial
|
|
|
device.type
|
|
|
driver.debug
|
|
|
driver.flag.allow_killpower
|
|
|
driver.name
|
|
|
driver.parameter.interrupt_pipe_no_events_tolerance
|
|
|
driver.parameter.lbrb_log_delay_without_calibrating
|
|
|
driver.parameter.onlinedischarge_calibration
|
|
|
driver.parameter.pollfreq
|
|
|
driver.parameter.pollinterval
|
|
|
driver.parameter.port
|
|
|
driver.parameter.synchronous
|
|
|
driver.state
|
|
|
driver.version
|
|
|
driver.version.data
|
|
|
driver.version.internal
|
|
|
driver.version.usb
|
|
|
input.sensitivity
|
|
|
input.transfer.high
|
|
|
input.transfer.low
|
|
|
input.voltage
|
|
|
input.voltage.nominal
|
|
|
ups.beeper.status
|
|
|
ups.delay.shutdown
|
|
|
ups.firmware
|
|
|
ups.load
|
|
|
ups.mfr
|
|
|
ups.mfr.date
|
|
|
ups.model
|
|
|
ups.productid
|
|
|
ups.realpower.nominal
|
|
|
ups.serial
|
|
|
ups.status
|
|
|
ups.test.result
|
|
|
ups.timer.reboot
|
|
|
ups.timer.shutdown
|
|
|
ups.vendorid
|
|
About this device
Vendor/Manufacturer information:
Further system data or configuration examples:
upsrw ups@localhost listing# TODO: Convert to RW:... and RO:... markup
:; upsrw ups@localhost
[battery.charge.low]
Description unavailable
Type: STRING
Maximum length: 10
Value: 10
[battery.mfr.date]
Description unavailable
Type: STRING
Maximum length: 10
Value: 2001/01/01
[battery.runtime.low]
Description unavailable
Type: STRING
Maximum length: 10
Value: 120
[driver.debug]
Description unavailable
Type: NUMBER
Value: 0
[driver.flag.allow_killpower]
Description unavailable
Type: NUMBER
Value: 0
[input.sensitivity]
Description unavailable
Type: STRING
Maximum length: 10
Value: medium
[input.transfer.high]
Description unavailable
Type: STRING
Maximum length: 10
Value: 143
[input.transfer.low]
Description unavailable
Type: STRING
Maximum length: 10
Value: 91
[ups.delay.shutdown]
Description unavailable
Type: STRING
Maximum length: 10
Value: 20upscmd -l ups@localhost listing# TODO: Convert to CMD:... markup
:; upscmd -l ups@localhost
Instant commands supported on UPS [ups]:
beeper.disable - Description unavailable
beeper.enable - Description unavailable
beeper.mute - Description unavailable
beeper.off - Description unavailable
beeper.on - Description unavailable
driver.killpower - Description unavailable
driver.reload - Description unavailable
driver.reload-or-error - Description unavailable
driver.reload-or-exit - Description unavailable
load.off - Description unavailable
load.off.delay - Description unavailable
shutdown.default - Description unavailable
shutdown.reboot - Description unavailable
shutdown.stop - Description unavailable
test.battery.start.deep - Description unavailable
test.battery.start.quick - Description unavailable
test.battery.stop - Description unavailable
