Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from MicroDowell.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.2.0

Report #1 with driver powerpanel (detailed comments available)

This device is known to work with driver powerpanel.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.capacity

7

battery.charge

100.0

battery.charge.low

20

battery.packs

1

battery.voltage.nominal

12

driver.name

powerpanel

driver.parameter.pollinterval

2

driver.parameter.port

/dev/ttyS0

driver.version

2.2.0-

driver.version.internal

0.22

input.frequency

49.9

input.frequency.high

63

input.frequency.low

47

input.transfer.high

272

input.transfer.low

180

input.voltage

234

input.voltage.nominal

230

output.voltage

234

ups.firmware

1.704

ups.load

80

ups.mfr

CYBER POWER

ups.model

500VA

ups.power.nominal

500

ups.realpower.nominal

330

ups.serial

000000000000

ups.status

OL

ups.temperature

32

Report #2 with driver cpsups (detailed comments available)

This device is known to work with driver cpsups, now replaced by the powerpanel one.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100.0

battery.runtime

3:58

driver.name

cpsups

driver.parameter.pollinterval

2

driver.parameter.port

/dev/ttyS0

driver.version

2.2.0-

driver.version.internal

.05

input.frequency

50

input.voltage

234

output.voltage

234

ups.load

82

ups.mfr

CyberPower

ups.model

OP500TE 1.704

ups.power.nominal

500

ups.runtime

16.5

ups.status

OL

ups.temperature

32